Align all stakeholders in the ecosystem with a good consumer experience

Thanks and trust, RiKe is with you!

CPE Impact Modifier

Chloride Polyethylene (CPE) is saturated high-polymer material made by chlorinated HDPE, as an impact modifier, Chloride Polyethylene(CPE) could obviously improve the toughness and impact property of PVC products, meanwhile, effectively promote fusion and improve processability of PVC material, it is one kind of general impact modifier with super higher cost-performance, it is mainly used for PVC rigid applications, such as: profile, pipe, fitting, sheet, board and seal strip, etc.

more

ACM Toughness Modifier

ACM products is core-shell structure toughness modifier made by CPE with super high elongation at break and acrylic polymer, the ACM toughness modifier has super high elongation at break therefore could effectively improve toughness of PVC products. ACM toughness modifier also has perfect processability which could give good processability to PVC products. It is suitable for PVC rigid products especially for the field of low-temperature toughness and higher filler level.

more

Foaming Regulator For Soft Products

HL-82 is a kind of acrylic foaming regulator special for soft products. HL-123 is a bubble handling agent special for soft products.

more

Foaming Regulator For Board

HL series foaming regulators are super-molecular weight copolymer, Super high intrinsic viscosity can endow PVC material with higher melt strength to avoid bubble holes breaking therefore making uniform and tight cell structure.

more

SAN Processing Aid

HL series SAN processing aids can effectively improve processing ability and flowability of PVC material.

more

Lubricating Processing Aid

HL series lubricating processing aids are high molecular weight co-polymers with better metal release function, which can prevent the adhesion of the barrel and PVC melt efficiently.

more

Transparent Processing Aid

HL series transparent processing aid has good conformity with PVC resin, which can obviously improve the processing performance of PVC material and dispersion therefore can endow PVC sheets with better transparency.

more

General Processing Aid

HL series general processing aids are acrylic based co-polymer with moderate molecular weight to improve the processability in production,enhance the melt sheer while processing and lower the processing temperature.

more

High Chlorinated Polyethylene Resin

High chlorinated polyethylene resin is made from polyethylene through highly chlorination.

more

CM Rubber

Chlorinated polyethylene rubber is a saturated thermoplastic elastomer, CM rubber for short.

more

CPVC Compound

HL series CPVC compound are developed by using our own CPVC resin, it has good heat resistance, excellent corrosion resistance to acid and caustic, good processability and production stability and good mechanical property.

more

CPVC Resin

CPVC is a thermoplastic produced by chlorination of PVC resin that could be used in many fields. 

more
< 12 > proceed page